Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Wheels Manufacturing Inc. Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 114
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Campagnolo Super Record/Record EPS V3 Power Unit
$435.00
The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - 17mm diameter for easy seat post installation - Battery charges through the Interface Unit - Compatible only with the Super Record/Record V3 Power Unit
Zipp End Plug Cable Guide Vuka Extension
$6.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Wheels Manufacturing Inc. Derailleur Hanger 44
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 8
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-6.
Wheels Manufacturing Inc. Ball Bearing Retainer
$4.75 - $17.00
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Derailleur Hanger 337
$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913015-003 - Attaches to frame with (1) M4x8 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish - Note: This hanger is not the same as DROPOUT-274, which uses an M3 flat head screw
K-Edge Pro Braze-on Chain Catcher with SRM Magnet
$59.99
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Profile Design Universal Riser Kit
$16.99
Riser kits increase stack height to fit a wide range of riding styles for efficient positioning. Compatible with Profile Design's ZBS Aerobars, T Plus Carbon Series Aerobars, and T Plus Aluminum Series Aerobars. - Kit adds 1/2" rise and is non-adjustable to stack height. - Compatible with all Profile Design aerobars except for Century and Legacy models. - Kit includes a pair of 1/2" risers, bolts specific to riser size, and mounting hardware.
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Surly Straggler Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm
Surly Tuggnut/Snuggnut Slider
$6.00
- Replacement slider for the Surly Tuggnut and Snuggnut
Surly Track Cog Lockring
$16.00
Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact
SRAM PowerLock Eagle Chain Connector 12-Speed
$17.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Jagwire Brake or Shift Cable Tips
$3.99 - $39.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Wheels Manufacturing Inc. Derailleur Hanger 25
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Sunlite Bottle Opener Seat Quick Release (QR)
$6.79
• Quick-release seatpost clamp • 6061-T6 aluminum lever and cap with a chromoly bolt • Bottle opener opens almost any bottle
Origin8 Hydraulic Line Pass-Through Inserts
$3.90
Switching over to hydraulic brakes? Secure your cables with Origin-8's Hydraulic Pass-thru inserts. They will securely hold the hydraulic hose in place while you ride. • Fits bicycles with pass-thru braze-ons • Holds hydraulic hose securely in place • Bag of 10
Electra Townie Quick-Release Seatpost Collar
$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
Sunlite Sunlite Derailleur Clamp Bolt
$0.99
- Model: Replacement bolt - Compatibility: Allen, M5x16
Wheels Manufacturing Inc. Derailleur Hanger 76
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Sunlite Hub Sealed 14mm
$8.99
- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm
Origin8 UD Carbon Fiber Headset Spacers
$17.00
- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5
Wheels Manufacturing Inc. BB30 Clips
$16.50
Replacement retainer clips for BB30 bottom brackets to retain the 6806 bearings in place. - For BB30 standard frames - Sold 2 per bag
Chromag Seat QR
$50.00
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt
Ritchey Carbon 1-Bolt Seatpost Clamp
$13.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Carbon 1-bolt posts to various saddle rail dimensions. - 8x8.5mm or 7x9.6mm available
RockShox Maxle Ultimate Front Thru-Axle
$65.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
Ritchey Aluminum 1-Bolt Seatpost Clamp
$13.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Alloy 1-bolt posts to various saddle rail dimensions. • 8x8.5mm or 7x9.6mm available