Parts & Accessories
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
The lock comes with a burlap bag, dust cap, two keys, and a Kuat keychain bottle opener. 3/8" pin is for our 1.25" racks and the 1/2" pin is for our 2" racks.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily by placing under hood or trunk and is secured by the closed lid - Boat bow & stern tie-down loops that are fastened inside the vehicle hood or trunk hatch and protrude out through the edge to provide a secure loop to attach tie-downs to
The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.
• Pack includes 2 wheels straps and 2 road adaptors • The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.
Allen's Adapter Bar allows full suspension bikes and non-conventional frames to be used on your Allen rack. An internal spring mechanism maintains constant tension to keep your frame secure. Plus, the plastic coating protects your bicycle's finish.
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
The 1-1/4" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
The 2" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
$39.00 - $49.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).
Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings. - Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times - Packaged as a pair - 15-foot length or 9-foot length
The Thule ThruRide 9mm Skewer allows the ThruRide to lock traditional forks with 9mm quick release axles to the carrier. - Universal locking skewer with single side adjustment for easily securing bikes with traditional 9mm forks (lock included)
Having trouble getting your non-traditional bike onto your trunk or hitch rack? Struggle no more with Hollywood's Bike Adapter Pro. It quickly attaches to most bikes to form a top tube and makes it easier than ever to safely and securely attach it to your rear rack.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.