Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "rain pants"

$109.99 - $119.99
The Benno Half Rail Plus attaches to the platform rack providing stability for rack passengers. The half rail design provides easier access for ingress and egress. Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes.
$179.99
The Benno High Rail rack add-on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes. Compatible with: - Categories: Boost EVO 5, Boost EVO 4 - ONLY for Boost EVO 4 and later!
$174.99
The Benno High Rail rack add on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes Compatible with: - Categories: Boost EVO 3, Boost EVO 2, Boost EVO 1, Carry On - NOT compatible with Boost EVO 4 and later!
$85.00
The REFLECT360 trousers are rugged, hard-wearing, waterproof, and breathable pants designed specifically to ensure you arrive at your destination dry on those wet and windy days. The elements will be kept out, yet the breathable fabric will enable heat to escape. Designed specifically for cycling and cut accordingly, the lower leg has a 30cm (size variable) zipper to allow you to quickly get them on/off over your shoes. The zip has a protective waterproof hook-and-loop flap to ensure no water can access the zipper. An additional hook-and-loop adjustable leg band gives you the flexibility to ensure no excess material will get caught up in your chain. The REFLECT360 range is renowned for its reflective features, so we have given the REFLECT360 waterproof trousers two ample stripes at the top (on each leg) and the same on the lower leg. These, alone, ensure lots of reflectivity at night, but we've also added a 5cm-thick stripe on the lower zip cover, along with plenty of extra reflective piping and logos. - Rugged, hard-wearing, waterproof, and breathable trouser designed specifically to ensure you arrive at your destination dry - Designed specifically for cycling and cut accordingly, the lower leg has a zipper to allow you to quickly get them on/off over your shoes - Adjustable ankle strap for clearing chain and components - Large amounts of reflective detail and piping - Drawstring elastic waist - Rear pocket
$33.50
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
$22.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
$220.00
A saddle that moves with you, the flexible performance of the C13 158mm saddle comes from its vulcanized natural rubber and nylon top that is also durable and waterproof creating a saddle that is very light, yet comfortable. This is accomplished through a continuous carbon rail that increases strength and durability while eliminating performance-resistant contact points. Events like Paris-Brest-Paris, the Transcontinental, or the Silk Road Mountain Race require a comfortable saddle made for long distance cycling. The C13 158mm is the optimal width for cycle touring, brevet challenges, or audax races, or simply for anyone who wants a light and comfortable saddle for local racing or group rides. Materials - Carbon frame - Naturally flexible rubber - Moves with you - All-surface vibration absorption - Continuously comfortable - UV & abrasion resistant - Weatherproof nylon cover Specifications - Length: 275mm - Width: 158mm - Height: 55mm - Weight: 310g
$54.00
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$599.99
The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.
$824.99
Lighter, stiffer, and more tunable than its competitors, the Mattoc is the desired componentry for all bikes. The Mattoc Expert should be on your bike not just because it can address all needs, but because it can improve the riding experience in a meaningful way. The Expert version of #thepeoplesfork tips the scales at a scant 1770 grams yet is stiffer than nearly anything else available in its travel range. Translation: an extremely lightweight and efficient build whose industry-leading stiffness ensures precise and reactive handling ready to outperform any other product it is compared to. The Manitou Expert boasts an Expert Air spring with IVA, compression damping via the VTT-6P system, and rebound damping via an open cartridge with adjustable TPC. True to Manitou’s industry-leading tuning capabilities, the Expert allows adjustments via Air, Air Volume, Rebound, and 3-position Compression (Open, Trail, Lock) With Open Mode Low-Speed Compression Adjustment. Perhaps the most versatile fork available not only in terms of travel but also application and customization of performance. Such amazing performance, tailor-tuned to your needs, arises from Manitou’s never-ending search for a smoother and better, best ride. KEY FEATURES - 27.5” is 20g less than the previous model. - Over 19% stiffness increase from the current 27.5" 160mm to the new 27.5" 150mm. 29" Stiffness increases are higher. - Expert air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to DoradoTM Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider's weight, style, and conditions without the need for additional parts. - A single external compression adjuster that simultaneously adjusts HS and LS damping characteristics. It features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. The resulting wide tuning range combines the benefits of a low-speed platform and high-speed progressive tune can suit any terrain. - Trail Side Relief casting bleed screws allow users to release casting pressure from the fork. Casting pressure increase is normal, and extreme riding can increase the pressure at a fast rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.
$99.90
GND has been specifically developed for off-road riding. Design and ergonomics in the new GND were conceived specifically to achieve the perfect mix between areas of release and areas of support. The front part is wider and softer compared to other saddles in the collection, offering increased comfort even in more aggressive positions (for example, on climbs). The design, ergonomics, and width of the back part of the saddle offer perfect support for the cyclist, even when they're not pushing hard on the pedals. Its features and design make the GND saddle particularly suited for the Off-Road sector. The saddle's structure is open in the middle to alleviate pressure, while full-fit padding (no cutout) prevents riding pants from getting muddy. The padding features a unique double density to optimize areas of support (front and back), complete with two "shock absorber" inserts to reduce the vibrations generated from off-road terrain and transmitted from the bicycle to the rider. The Supercomfort version is perfect for several types of users: 1. Riders who don't spend a lot of time on a bike. If on average, the ride doesn't last more than 2 hours, it is better to use more padding. In this case, the sustaining subcutaneous tissues don't have to adapt to prolonged pressure. 2. Riders who spend a lot of time on a bike. If you spend more than 5-6 hours on the saddle, you need thicker padding, considering the time that the subcutaneous areas are subject to pressure. 3. For riders who prefer rough terrain and use Gravel Bikes, the Supercomfort saddle better absorbs the vibrations caused by bumpy surfaces. The Shortfit Supercomfort was developed considering the specific components that determine the level of comfort: - Padding: The Racing version features a layer of Biofoam combined with an additional layer of Gel. These are merged with variable thickness depending on the support area in order to optimize the part that comes into contact with the pelvic bones. - The long central cutout (Open -Shell) guarantees all-day comfort and support on the whole length of the saddle. This feature improves blood flow, preventing numbness and providing relief from pressure on the perineum. Recommended for individuals with averagely high pelvic rotation. - The covering features micro-perforations to facilitate airflow and keep contact surfaces dry. - The "GND Racing Gel" features Gel inserts, a version particularly suited for the E-MTB field. This saddle is also upholstered with two different materials: the resistant "microfeel" for areas of support and two "woven" areas that guarantee maximum abrasion and scratch resistance on the sides of the saddle, itself. - Rail: Manganese - Shell: Carbon Fiber Reinforced - Foam: Biofoam - Cover: Microfeel - Dimension: 262 x 145mm - Weight: 230g - Level: Dynamic
$1,049.99
The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry Key Features: - 59 grams decrease from the previous model. - Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.
$1,949.99
Legends Never Die Back in a big way, the all-new Dorado Pro is ready to turn the suspension world upside down. Featuring an inverted design, carbon upper structure, 37mm stanchions, and refreshed internals the new Dorado Pro is the pinnacle of suspension technology. The new stiffer chassis is paired with an all-new sealed version of our TPC+ damper and improved Dorado Air Spring with an IRT volume adjuster. These technologies combined into one ultimate platform provide more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease. Key Features: - Carbon Fiber Legs and the 37mm chassis result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. They also have looks that can kill. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IRT (Infinite Rate Tune) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed TPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom-out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed buttons allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$200.00
Highly durable trail pants with a lightweight feel that belies their toughness and reliability. Ideally suited to colder conditions, the pants feature a fluorocarbon-free DWR treatment to help keep water out. The pants are constructed from a Cordura-blended stretch fabric, fit over knee pads, and have a tapered leg to ensure maximum freedom of movement with no impact on pedaling. What's more, they have a seam-free gusset for extra saddle comfort and an elasticated waist that gives a secure fit. - Highly durable trail pants with a lightweight feel - Ideal for riding in cooler, changeable conditions - Cordura blended stretch fabric - Reinforced around the knees with Ripstop fabric for extra durability - Fluorocarbon-free DWR treatment - Zipped pockets keep belongings secure
$39.95
The fun doesn't stop when the rain starts. Keep your canine copilot warm and dry with the Bark Ranger Rain Cover. When it's raining cats and dogs, keep your pup dry and cozy with the Bark Ranger™ Rain Cover. Water-repellent and wind-resistant, the rain cover fits snugly over your trailer to keep the elements out. When the rain stops, the cover stows easily in the attached storage bag. Simply attach the rain cover storage bag to the accessory loops on the top of the trailer and you're ready for any surprise rain shower. You'll Love – - Water-repellent and wind-resistant - Easily attaches to Bark Ranger™ accessory loops for use whenever the weather changes - Reflective accents provide added visibility for your trailer on cloudy days and in low light - Adjustable elastic cable keeps the cover snug against the trailer - Stows easily in attached storage bag Specifications: - Coated 70D ripstop nylon - Weight 0.5 lb / 0.25 kg
$49.95
The fun doesn't stop when the rain starts. Keep your canine copilot warm and dry with the Bark Ranger XL Rain Cover. When it's raining cats and dogs, keep your pup dry and cozy with the Bark Ranger™ Rain Cover. Water-repellent and wind-resistant, the rain cover fits snugly over your trailer to keep the elements out. When the rain stops, the cover stows easily in the attached storage bag. Simply attach the rain cover storage bag to the accessory loops on the top of the trailer and you're ready for any surprise rain shower. You'll Love – - Water-repellent and wind-resistant - Easily attaches to Bark Ranger™ accessory loops for use whenever the weather changes - Reflective accents provide added visibility for your trailer on cloudy days and in low light - Adjustable elastic cable keeps the cover snug against the trailer - Stows easily in attached storage bag Specifications: - Coated 70D ripstop nylon - Weight 0.7 lb / 0.35 kg
$99.99
DURABLE RIDING PANTS FOR YOUNGER SHREDDERS! The MTB 4.0 Gravity pants are ideal for young shredder who need a durable, lightweight pant. Dedicated for Downhill, Trail and BMX-these are not just converted MX pants! These pants offer a comfortable pre-curved pedal and knee pad optimized fit for junior riders. Made from a lightweight, ventilated stretch material the Leatt MTB 4.0 Gravity pants are legendary. Additional waist straps offer great adjustability so you can ride with or without impact short protection. Bad weather and water fights are not a problem either thanks to the 500D laminated seat panel and inner leg. - Lightweight durable shell for rigorous riding - Breathable and comfortable 360° seamless stretch pants - Pre-curved riding fit with space for knee pads - Dirt, water and stain resistant fabric coating - Hip pockets with key loop - Rear waist pocket with soft touch liner for phone storage - Shin brush guards for added protection - 3-layer waterproof breathable laminated seat panel - Multi-row reinforced stitching - YKK –Japan. Top Quality Zippers - Moto buckle fastening for a secure fit and easy dressing - Anti-odor Moisture Coolmesh lining - Plastic Free Recyclable Packaging - Size: Junior #S-XL (120-160cm)
$169.99
ADV Offroad SubZ Pants are durable, windproof and water-repellent cycling pants designed for intense gravel and mountainbike cycling in cold winter conditions. These technically advanced bike pants are made of a wind- and waterproof fabric and comes with brushed inside for extra warmth and comfort. In addition, reinforced fabric at crotch area ensures great durability. Details: - Wind- and waterproof fabric, WP 10,000/MVP 8,000 - Brushed inside for extra warmth - Reinforced fabric at crotch area - Front pocket with waterproof zipper - Reflective details Features: - Windproof - WaterRepellent Fabric Composition: - Front & Upper Back Body: Face 96% Polyester, 4% Elastane, Mid: 100% Polyurethane, Back: 100% Polyester - Lower back body: Face & Back: 100% Polyester, Mid: 100% Polyurethane *Model in BLACK is 5'11" (181cm) and is wearing size medium.
$210.00
We designed the Women’s Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit - Available in Women’s (fitted) and Men’s (straighter) cuts
$40.00
Our knee-high heavyweight socks are warm enough for the coldest days out. Knee-high coverage eliminates gaps in layers, making these the best winter cycling socks for combining base layers, pants, and boots. The Merino wool-blend fabric wicks moisture away from feet to keep them warm and dry. These deep-winter bike socks are toasty enough on their own for super-cold days, and can be layered with our lightweight socks for a vapor barrier in deep cold.? - Heavyweight Merino wool-blend fabric - Measures 11" tall - Ideal for the coldest days out, especially when wearing boots with pants and bibs
$219.99
If you enjoy riding on those wet and muddy days when most people stay at home and drink tea, then the Leatt 5.0 pants are for you. These three-layer Hydradri membrane, waterproof and breathable 30.000/23.000 pants with a durable stain resistant fabric coating will keep that smile on your face when you’re riding through puddles and splashed with mud. The four-way stretch fit with ankle adjusters is snug enough to keep the bad weather out and keep you comfortable all day long. With plenty of pockets and fleeced telephone pouch – cargo is not a problem for the 5.0 pant. Every day is the perfect day to go riding with the Leatt 5.0 pants -HydraDri MAX 30.000mm waterproof / 30.000g/m² breathable -4 way stretch HydraDri MAX seamless seat and back panels -Pre-curved riding fit with space for knee pads -Ankle adjustment -Dirt, water and stain resistant fabric coating -Multi-row reinforced stitching -Inner thigh zipper vents for great ventilation -Fully tape seam sealed -Hip pockets with Key loop (left) -Rear waist pocket -Thigh cargo pocket with silicone gripper -Reflective details. -YKK – Japan. Top Quality Zippers
$59.99
Grocery Pannier that clips onto a standard rack. Has rain fly to keep water out and contents in! Folds flat when not in use and has tricky handle system. Uses 2 structure braces on the inside of bag when in use to keep the pannier sturdy while riding. 2 D-rings on each side of the pannier to attach shoulder strap! - 13" long x 6.5" deep x 10" tall (with an additional 4 inches with the use of the rain fly)
$24.99
- Plastic cover - Protects the bicycle from rain, dust and harmful UV rays - 115 x 110/190 cm
$25.00
From the dancefloor to the shop floor to the last mile of your gravel century, All-City’s Club Tropic Wool Socks promise 6" of moisture-wicking comfort and style. It would be a shame to hide them behind pants. - Two sizes (Sm/Md and Lg/XL)
$69.95
A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz
$210.00
We designed the Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit SPECS: FEATURES: - Double-weave fabric provides the best combination of weather protection, breathability, and stretch - Black reflective material placed in key areas enhances your nighttime visibility - Minimal and secure webbing waist adjustment - Zipper and snap ankle closure fits over 45NRTH boots without creating excess bulk - Imported POCKETS: - Front pockets and zippered rear pockets with side access VENTILATION: - Zippered ventilation at the thighs and lower leg - SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS: - 88% Recycled Nylon, 12% Elastane - Exclusive of trims
$89.99
- Practical shopper bag with large front outer pocket and main compartment - Durable design and stud bag feet - Rain protective zipper and comfort grips handles - Reflective logos - Integrated Hook-On system
$39.99
Box Two Saddles are the first of their kind, featuring a proprietary co-molded nylon shell and carbon fiber Seatpost. Super lightweight and designed specifically for BMX racing, they feature the Box logo molded into the top and have reduced profiles to prevent snagging on pants. FEATURES - Impact-Resistant - Minimum Insert Indicator - Durable Construction
$22.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
Page 1 of 4 Next page