Bike Parts

The Pressure is simply a refinement of our ever popular Contact pedal. The Pressure has a longer body than the Contact, but retains the smallest Q-Factor in the fleet. This makes it ideal for DJ and freeride, but many riders do like to use them for DH and trail riding too.

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

CNC machined 6061 aluminum Black anodized finish Attaches to frame with 2 M6x12mm Socket Head, M5x22mm Socket Head Specialized Part #: S196000002 Specialized Fuse - 2020+

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

- Dispenser of chromed ferrules - 5mm

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Replacement small parts for Hope disc brake Hope disc brake calipers.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Converts Schrader rims to Presta - Rubber - Sold individually

- Butted 2.0/1.7 stainless steel - Unique sizes specific to Easton wheels - Sold individually

Replacement piston and seals for Hope disc brake calipers.

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

- Double butted 2.0/1.5/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 143g @ 32/265mm - Box of 72 - Nipples sold separately

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

- Aluminum straddle cable carrier for cantilever brake