Bottom Brackets

- Fits 3-piece crank set - Includes right and left cup, lockring and bearings - English type - Shell: 68/73mm - Cup Material: Steel - Weight: 123 grams

Race Face Cinch bottom bracket spacer kit for BB30/PF30 bottom brackets.

- Thread: BC 1.37 x 24T - Caged bearing 1/4" x 9 - Fits most square taper cotterless BB axles - Spindle Type: SQR JIS - Cup Material: Steel

Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi

-Traditional chromoly square taper crank-arm interface with steel cups - 108mm for use with most Track cranks - 110mm for use with most Road double cranks - 113mm for use with most Road triple cranks - 118mm for use with most Mountain triple cranks - Bolts included

Race Face Cinch Bottom Bracket Spacer Kit • 30mm diameter spacers needed for correct installation of Cinch 190mm spindle in 132mm BB shell of Surly Ice Cream Truck and Salsa Blackborow.

Race Face Cinch bottom bracket spacer kit of OSBB bottom brackets.

- Fits 3-piece crank set - Includes right and left cup, lockring and bearings - English type - Shell: 68/73mm - Cup Material: Steel - Weight: 123 grams

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm

- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.

Race Face bottom bracket spacer kit for 124-130mm bottom brackets.

Includes two precision sealed Mid type bearings, high-density plastic cone spacers, center tube spacer, sprocket adapter, and plenty of adjustment washers. Product Specifications - Type: Mid - Bearings: 2x Sealed - Includes: Bearings, Cones, Spacer, Washers - Weight: 4.4oz

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

- Replacement fat bike bottom bracket with square-taper chromoly spindle - Sealed bearings - Steel shell and cups - 120mm shell width - 180mm spindle length - 1.37" x 24T English thread

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

Kink bottom bracket kits include precision sealed bearings, machined dust cover cones, and all the spacers needed for perfect crank and chain alignment. The center tube spacer is a standard 51mm width so no additional internal spacers are needed, and on the off chance your frame requires a 48mm center spacer, it can be cut down using the cut guide machined into the spacer. TECH SPECS - Type: Mid - Material: 6061-T6 Aluminum - Bearings: Precision Sealed - Weight: 5.0oz(22mm)

Includes two precision sealed bearings, aluminum cups, high-density plastic cone spacers, center tube spacer, sprocket adapter, and plenty of adjustment washers. Product Specifications - Type: American - Bearings: Sealed - Includes: Cups, Bearings, Cones, Spacer, Washers - Weight: 10.5oz

Bottom brackets from FSA for non-threaded applications. - Spindle Interface Type: 386 EVO - BB Shell Width: 86mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams

FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - Die cast and CNC-machined alloy bearing cups - 19mm I.D. - BB86/92 compatible - BB Shell Width (mm): 92 - Bottom Bracket Shell I.D.: 41

Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

This European type bottom bracket features four sealed cartridge bearings inside threaded aluminum bearing cups. Includes center tube spacer and plenty of adjustment washers. Product Specifications - Type: Euro - Bearings: 4x Sealed - Includes: Cups, Bearings, Spacer, Washers - Weight: 3.8oz