Parts & Accessories

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

Fits 19mm team & talon cranks: - Splines: 48 - Diameter 19mm - Length: 5.5" (140mm) - Spindle bolts: 3/8" X24tpi (not included) - Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

CINCH Crank Bolt with Washer

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Series: SLX - Crank Construction: HOLLOWTECH II Technology

- BCD: Direct Mount Shimano - Chainline: 55mm - Crank Arm Length: 170mm - Material: Aluminum - Interface: Hollowtech II - Speed: 11/12 - Crank Spindle Diameter: 24mm - Drivetrain Spacing: SuperBoost+ - Pedals Thread: 9/16''

Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Designed to work seamlessly with the new wave of 2×10 drivetrains, the 2x utilizes MRP's patented integrated skid chainring protection (US Patents RE 42,436 / 8,235,849 Patents Pending) and features a dual pulley tensioning system. Notable on the 2x system is the absence of a crank-mounted bash guard or guide ring, instead it relies on the front derailleur and cutting-edge lower pulley assembly for complete chain retention. The integrated skid protects the chainrings from impacts without the added weight of a full bash ring. The dual pulley tensioning system ensures that the chain is properly tensioned and in the right position, keeping it on the chainring in the roughest conditions. The dual pulleys also reduce drag and noise compared to other designs, ensuring a better riding experience. Finally, the raised top fin profile prevents the chain from dropping to the BB shell. - Removable integrated skid protects chainrings and glides over rocks and obstacles - Dual pulley design provides precise chain engagement while reducing noise and drag - Raised top fin profile prevents the chain from dropping to the BB shell - BB mounted guides are only compatible with traditional, threaded BB systems

Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

Replacement crank arm for GX Eagle GXP

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

Various parts for repair and replacement on Odyssey cranks.

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

Easton spider and ring assemblies for CINCH cranks.

Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy

- Lower slider replacement parts for E-13 chainguides

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

- XT M8130 12 speed crankset - Fits 157mm SuperBoost MTB frames - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type (TL-FC41 tool included) - Q-factor: 181mm - Chainline: 56.5mm

- Replacement bolt for DUB cranks

RaceFace Crank Arm Fixing Bolts - M15

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin