MTB Parts Catalog Link Section

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Front and Rear application

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- Comfortable ride - Classic colors

VP's VX Trail Pedals are built for more stability and more shoe/pedal contact in an SPD-cleat compatible pedal. If you want value, durability and grip while still keeping the weight to a minimum, the VX Trails are your pedals. They boast lightweight aluminum bodies; heat-treated steel cleat jaws; forged, CNC-machined and heat-treated chromoly axles for strength and sealed bearings for long life. They have adjustable release tension, too. - 410 grams

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

- High impact Resin multi-use body with integrated cage - Externally sealed ball bearing system - 100mm x 82mm platform - Weight: 316g pair (9/16")

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

- Plastic nylon molded body - Chromoly spindle - 318g pair

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

- One-piece resin body and cage - Toe-clip compatible

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees

- One-piece ABS resin body - Molded pins - 320g pair

The Kenda Alfabite is a great all-around budget mountain/BMX tire, available in a steel bead. - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tires

- One-piece resin body - Barefoot friendly rubber surface - Includes reflectors

- One-piece resin bodies - Barefoot-friendly rubber surfaces - Boron-steel axles - No reflectors - 400 grams/pair

- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair

- One-piece resin body with rubber surface for grip - Boron spindle - 400g pair

- Long-lasting, high-quality rubber compound - Center tread siping for enhanced wet road traction - Continuous center tread for a smooth ride

The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material. - Micro knurling with 24 pins for traction - Recessed end to prevent damage to bearing cover - Chromoly spindle with 6mm broach and 15mm wrench flats - Weight: 391g - Pedal Body Material: Composite/Plastic

Sturdy steel construction with a versatile riser bar style.

- Fast-rolling Cross Country mountain bike tire - Designed mainly for hardpack trails - Bead: non-folding - Weight: 770 grams (29-inch)

Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface

Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g

- All-around tire for hard pack to loose conditions - Center tread features low, wide knobs spaced widely apart to aid in mud shedding - Shoulder knobs have a tall profile to really dig in to loose soil - Folding bead version features a dual compound tread for improved grip, and EPS puncture protection

The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip. - Slim profile - Large surface area - Heat treated 4130 spindle - 9/16"

The Twisted Pro pedal features a larger body shape, slimmer height and more concave. - Loose-ball bearing

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- Chrome plated steel body and cage - Built in reflectors