Your Search: "rain pants"

Legends Never Die Back in a big way, the all-new Dorado Pro is ready to turn the suspension world upside down. Featuring an inverted design, carbon upper structure, 37mm stanchions, and refreshed internals the new Dorado Pro is the pinnacle of suspension technology. The new stiffer chassis is paired with an all-new sealed version of our TPC+ damper and improved Dorado Air Spring with an IRT volume adjuster. These technologies combined into one ultimate platform provide more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease. Key Features: - Carbon Fiber Legs and the 37mm chassis result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. They also have looks that can kill. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IRT (Infinite Rate Tune) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed TPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom-out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed buttons allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender

The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry Key Features: - 59 grams decrease from the previous model. - Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.

Lighter, stiffer, and more tunable than its competitors, the Mattoc is the desired componentry for all bikes. The Mattoc Expert should be on your bike not just because it can address all needs, but because it can improve the riding experience in a meaningful way. The Expert version of #thepeoplesfork tips the scales at a scant 1770 grams yet is stiffer than nearly anything else available in its travel range. Translation: an extremely lightweight and efficient build whose industry-leading stiffness ensures precise and reactive handling ready to outperform any other product it is compared to. The Manitou Expert boasts an Expert Air spring with IVA, compression damping via the VTT-6P system, and rebound damping via an open cartridge with adjustable TPC. True to Manitou’s industry-leading tuning capabilities, the Expert allows adjustments via Air, Air Volume, Rebound, and 3-position Compression (Open, Trail, Lock) With Open Mode Low-Speed Compression Adjustment. Perhaps the most versatile fork available not only in terms of travel but also application and customization of performance. Such amazing performance, tailor-tuned to your needs, arises from Manitou’s never-ending search for a smoother and better, best ride. KEY FEATURES - 27.5” is 20g less than the previous model. - Over 19% stiffness increase from the current 27.5" 160mm to the new 27.5" 150mm. 29" Stiffness increases are higher. - Expert air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to DoradoTM Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider's weight, style, and conditions without the need for additional parts. - A single external compression adjuster that simultaneously adjusts HS and LS damping characteristics. It features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. The resulting wide tuning range combines the benefits of a low-speed platform and high-speed progressive tune can suit any terrain. - Trail Side Relief casting bleed screws allow users to release casting pressure from the fork. Casting pressure increase is normal, and extreme riding can increase the pressure at a fast rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

The CP 18L is a camera backpack for the ambitious amateur sports photographer, or the professional who aims to travel light when shooting. - Rapid access to the camera from the side - Perfect positioning and optimal air circulation - Belt system for a tripod, poles or ice axe - Integral rain cover - Additional compartments for laptop, hydration bladder, personal items and small parts - Padded, movable internal dividers & straps allows the photographer to carry his camera safely even when things get rough

- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 26L - Size: 26 x 50 x 16cm (10.2 x 19.7 x 6.3") - Weight: 1.07kg (2.4lbs)

- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit, and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 16L - Size: 50 x 26 x 12cm (19.6 x 10.2 x 3.5") - Weight: 1kg (2.2lbs)

Naughtvind Bibs balance warmth and breathability for unmatched comfort on cold-weather rides. We use fabric that’s water-, wind-, and abrasion-resistant on the outside and fleece-lined on the inside to keep the elements out and your body heat in. Pockets and reflective accents offer extra functionality and safety. The chamois-less design lets you pair Naughtvind Bibs with your favorite cycling shorts. We designed these winter cycling bibs to layer under our Naughtvind Pants for truly frigid days on the bike. - Chamois-less design for pairing with your favorite chamois shorts - Thermal fleece lining to retain body heat - Breathable mesh back for ventilation - 4/5 length fits with winter boots without bunching - Reflective accents for safety - Pocket storage for ride essentials - Made with sustainable materials

EVOC BLACKLINE backpacks represent the perfect blend of innovative ventilation and the successful technology standard of their PROTECTOR BACKPACKS. The EVOC FR TRAIL BLACKLINE is a high-end day pack with a back protector that offers optimal support during longer bike tours and trail rides. - Integrated back protector: backpack also serves as personal safety equipment (PSE) - Body-hugging fit - Completely ventilated carrying system with breathable hip belt - Back protector is removable and replaceable - 2-Step-Zip System - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, wide swing-open) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included)

- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit, and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 26L - Size: 26 x 50 x 16cm (10.2 x 19.7 x 6.3") - Weight: 1.07kg (2.4lbs)

Next-level performance protector daypack focused on carrying comfort, weight reduction, and flexibility - Next-generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next-level carrying comfort, back fit and load distribution - Wide hip wings and Airoflex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Volume: 10L

The Require offers a classic look and is made from high-performance materials. The Grilamid frame with manually molded hinges is lightweight, flexible, and durable. The hydrophilic rubber stays grippy even when wet, so the glasses will stick to your nose when you move, regardless of rain or transpiration. The durable nylon lenses from Carl Zeiss Vision provide outstanding optical performance. Available with a tint specifically developed for best contrast in an urban environment and with transmission peaks to make sure traffic lights and car lights are highlighted. - Matt - Aluminum logotype - Hidden hinge - Grilamid

A saddle that moves with you, the flexible performance of the C13 158mm saddle comes from its vulcanized natural rubber and nylon top that is also durable and waterproof creating a saddle that is very light, yet comfortable. This is accomplished through a continuous carbon rail that increases strength and durability while eliminating performance-resistant contact points. Events like Paris-Brest-Paris, the Transcontinental, or the Silk Road Mountain Race require a comfortable saddle made for long distance cycling. The C13 158mm is the optimal width for cycle touring, brevet challenges, or audax races, or simply for anyone who wants a light and comfortable saddle for local racing or group rides. Materials - Carbon frame - Naturally flexible rubber - Moves with you - All-surface vibration absorption - Continuously comfortable - UV & abrasion resistant - Weatherproof nylon cover Specifications - Length: 275mm - Width: 158mm - Height: 55mm - Weight: 310g

If you enjoy riding on those wet and muddy days when most people stay at home and drink tea, then the Leatt 5.0 pants are for you. These three-layer Hydradri membrane, waterproof and breathable 30.000/23.000 pants with a durable stain resistant fabric coating will keep that smile on your face when you’re riding through puddles and splashed with mud. The four-way stretch fit with ankle adjusters is snug enough to keep the bad weather out and keep you comfortable all day long. With plenty of pockets and fleeced telephone pouch – cargo is not a problem for the 5.0 pant. Every day is the perfect day to go riding with the Leatt 5.0 pants -HydraDri MAX 30.000mm waterproof / 30.000g/m² breathable -4 way stretch HydraDri MAX seamless seat and back panels -Pre-curved riding fit with space for knee pads -Ankle adjustment -Dirt, water and stain resistant fabric coating -Multi-row reinforced stitching -Inner thigh zipper vents for great ventilation -Fully tape seam sealed -Hip pockets with Key loop (left) -Rear waist pocket -Thigh cargo pocket with silicone gripper -Reflective details. -YKK – Japan. Top Quality Zippers

We designed the Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit SPECS: FEATURES: - Double-weave fabric provides the best combination of weather protection, breathability, and stretch - Black reflective material placed in key areas enhances your nighttime visibility - Minimal and secure webbing waist adjustment - Zipper and snap ankle closure fits over 45NRTH boots without creating excess bulk - Imported POCKETS: - Front pockets and zippered rear pockets with side access VENTILATION: - Zippered ventilation at the thighs and lower leg - SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS: - 88% Recycled Nylon, 12% Elastane - Exclusive of trims

We designed the Women’s Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit - Available in Women’s (fitted) and Men’s (straighter) cuts

Highly durable trail pants with a lightweight feel that belies their toughness and reliability. Ideally suited to colder conditions, the pants feature a fluorocarbon-free DWR treatment to help keep water out. The pants are constructed from a Cordura-blended stretch fabric, fit over knee pads, and have a tapered leg to ensure maximum freedom of movement with no impact on pedaling. What's more, they have a seam-free gusset for extra saddle comfort and an elasticated waist that gives a secure fit. - Highly durable trail pants with a lightweight feel - Ideal for riding in cooler, changeable conditions - Cordura blended stretch fabric - Reinforced around the knees with Ripstop fabric for extra durability - Fluorocarbon-free DWR treatment - Zipped pockets keep belongings secure

A HELMET MADE FOR THE CITY STREETS The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion in road traffic. In big city traffic, a helmet is an indispensable companion for you as a cyclist. Accidents happen quickly and if you fall, a bicycle helmet protects you against serious injury. With the Pedelec 2.0, ABUS offers a bicycle helmet that meets the high safety requirements of the big city. Its deep temple area provides the required additional protection. The Pedelec 2.0 is also characterised by the integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain. The especially bright, rechargeable light and the replaceable visor offer additional, passive protection. - This NTA 8776 helmet is a helmet that complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility due to powerful reflectors - Large, highly mounted and integrated LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility: Helmet well suited to plait wearers - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet

A Helmet Made For The City Streets The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion and an indispensable companion for you as a cyclist riding in city traffic. Accidents happen quickly and if you fall, a bicycle helmet helps protect you against serious injury. The Pedelec 2.0 meets the high safety requirements of the big city, with a deep temple area that provides the required additional protection to give you confidence on your commute. The Pedelec 2.0 also features an integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain, and the especially bright, rechargeable light and the replaceable visor offer additional, passive protection. Technology: - This NTA 8776 helmet complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility thanks to powerful reflectors - Large, integrated, high mount LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet Sizing - Medium: 52-57 cm - Large: 56-62 cm

The Benno High Rail rack add-on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes. Compatible with: - Categories: Boost EVO 5, Boost EVO 4 - ONLY for Boost EVO 4 and later!

The Benno High Rail rack add on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes Compatible with: - Categories: Boost EVO 3, Boost EVO 2, Boost EVO 1, Carry On - NOT compatible with Boost EVO 4 and later!

The EVOC STAGE 18L is a multi-faceted, technical daypack. The series is characterized by the BRACE LINK carrying system, which adapts to the wearer's individual shoulder width. The best backpack for all those looking for ultimate carrying comfort and uncompromising back ventilation when riding their bike. - Emergency plan (integrated) - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, quick-access) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included) - Volume = 18L

ADV Offroad SubZ Pants are durable, windproof and water-repellent cycling pants designed for intense gravel and mountainbike cycling in cold winter conditions. These technically advanced bike pants are made of a wind- and waterproof fabric and comes with brushed inside for extra warmth and comfort. In addition, reinforced fabric at crotch area ensures great durability. Details: - Wind- and waterproof fabric, WP 10,000/MVP 8,000 - Brushed inside for extra warmth - Reinforced fabric at crotch area - Front pocket with waterproof zipper - Reflective details Features: - Windproof - WaterRepellent Fabric Composition: - Front & Upper Back Body: Face 96% Polyester, 4% Elastane, Mid: 100% Polyurethane, Back: 100% Polyester - Lower back body: Face & Back: 100% Polyester, Mid: 100% Polyurethane *Model in BLACK is 5'11" (181cm) and is wearing size medium.

These insulated softshell pants provide generous warmth for recreational winter activities with hidden ankle protection that offers a flattering boot-cut. The comfortable waist with elastic at sides and belt loops allow you to wear your own belt and maintains fit without compromising ease of movement. - Rhino 2-way stretch breathable woven fabric with DWR treatment - Lite Dexfil insulation for warmth - Drytex Mesh lining for comfort and moisture evacuation - 2 front pockets with flap - Reflective accents - Zip fly with snap and hook-and-eye closure

These insulated softshell pants provide generous warmth for recreational winter activities with hidden ankle protection that offers a flattering boot-cut. - Drytex Mesh lining provides comfort and moisture evacuation - Lite Dexfil insulation for warmth - 2 front pockets with flap - Reflective accents - Waist with elastic at sides and belt loops allows you to wear your own belt and maintains fit without compromising ease of movement - Zip fly with snap and hook-and-eye closure

With the EVOC STAGE 12L you get a compact technical daypack with excellent features. It's the number one pack for those looking to ride their bike with little equipment but uncompromising carrying comfort. Extra convenience comes with the freely moving BRACE LINK that allows the shoulder straps to adapt to the individual shoulder width of the wearer. - Emergency plan (integrated) - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, quick-access) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included) - Volume: 12L

With the EVOC STAGE 12L you get a compact technical daypack with excellent features. It's the number one pack for those looking to ride their bike with little equipment but uncompromising carrying comfort. Extra convenience comes with the freely moving BRACE LINK that allows the shoulder straps to adapt to the individual shoulder width of the wearer. - Emergency plan (integrated) - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, quick-access) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included) - Volume: 12L

The Urbanator bag is ideal for cyclists and commuters for taking their stuff around town or on some journey. This backpack-style bag has ample room for 2 days of clothes, an extra pair of shoes, and a 16" laptop. It features a padded laptop compartment and two additional pockets for small electronics or sunglasses, and 2 bottle holders. The bag's attached shoulder straps conveniently tuck away into a built-in storage pouch and are out of the way while mounting to a bike rack. The Urbanator mounts to most bike racks and has locking features to keep your bag secure. Made of water-resistant and easily cleanable material with an added weather-resistant rain fly. Converts from pannier to backpack in seconds! Designed by cyclists for cyclists! - Shoulder straps stow away in a compartment when used as a pannier - Multiple pockets for easy organization - High-visibility rain cover and reflective accents - Rack locks for secure mounting - Oversized, glove-friendly zipper pulls - Padded compartment fits 16" laptops - Opens like a book for easier packing & organization - Made of water-resistant PVC/TPU - Dimensions: 17" x 10" x 8" - 1350 cubic inches or 22 liters

- New waterproof construction - Quick access from both sides - Adjustable capacity due to roll-top closure - Durable and waterproof - For Roadbike, Gravelbike and MTB - Boa® Fit System for easy and secure fixation - 100% waterproof - Enough space for extra rain jacket, extra clothes, snacks, tools, and spare tube

The Handlebar Pack Boa L is a spacious, waterproof, and quick-to-fix handlebar cargo carrier equipped with the Boa Fit System. - Quick access from both sides - Adjustable capacity due to roll-top closure - Durable and waterproof - For road bike, gravel bike, and MTB - Boa Fit System for easy and secure fixation - 100% waterproof - Enough space for extra rain jacket, extra clothes, snacks, tools, and spare tube